Happy Valentines Day!
We’ll be making our own cold process for this,and don’t worry its not going to be boring. It’s a Diamond soap cos you readers are like our diamonds! (corny i know but you are!!;)
Our oil mix has Coconut Oil, Olive Oil, palm oil, and Castor Oil. As you readers must be aware, these oils have so many skin benefits that will protect your skin against aging, and moisturize it too.
Next, we use Bombshell Designer Fragrance Oil for a sultry sexy scent making you feel like a million bucks … or should we say precious as diamonds? The colors we use in this soap are Sparkle Bronze Mica and Titanium Dioxide.
Finally we add in almond oil. It can help reduce acne, heal your dry skin and also protect it from aging. So many benefits! Hopefully this soap makes your Valentine’s perfect!
Duration:
Preparation Time : 20 minutes
Total Time : 60 minutes
Ingredients: (makes 350g soap)
- 94.5g Coconut Oil
- 94.5g Olive Oil
- 31.5g Castor Oil
- 94.5g Palm Oil
- 46.5g SoapLab’s Sodium Hydroxide (NaOH) Pastilles
- 46.5g Distilled Water
- 20g Bombshell Designer Fragrance Oil
- 5g Sparkle Bronze Mica
- 10g Titanium Dioxide Mica
- 20g Almond Oil
- 20 pieces of melt & pour Diamond Soap
How to Make
Video:
Visual Guide
- Combine lye flakes with distilled water carefully. Wear gloves & long sleeves to avoid backsplash getting in contact with exposed skin.
- Slowly mix with a whisk until all the lye flakes have dissolved in the distilled water. Solution may become hot, do be cautious.
- To bring lye solution to room temperature, place container in a water bath.
- Separately, pour your Oil Mix into a heat resistant mixing container. Add in room temperature Lye Water.
- Next, use a whisk and mix until it reaches thin trace. Timing of this may vary as the faster you mix, the faster solution will saponify and reaches thin trace.
- Add in Bombshell Designer Fragrance Oil into the mixing container. Mix to combine the oil into the mixture.
- Add in Titanium Dioxide that has been diluted with 10g of Almond Oil and mix.
- Pour 1/4th of the mixture into the silicon mold.
- Sprinkle on some Sparkle Bronze Mica onto the soap. Repeat Steps 9 & 10 until mold is full.
- Using a whisk, swirl mica and soap together to create a pattern.
- Place melt & pour diamond soap on top. Arrange them according to your liking. Leave soap to harden for 24 hours.
- Once soap has harden, remove soap from the mold carefully.
- Using a soap cutter or a kitchen knife, cut soap into desired size.
- Soap will need 4 weeks to cure. After 4 weeks soap is ready to be use (:
Order Ingredients
Caution!
- Always test the product on your skin for allergic test first. Click here to find out how to do so
- If you are selling this product, advice your consumers to do allergic test first
- Make sure all your utensils and work surface is clean and sterilise as dirty area and utensils can reduce shelf life of scrub
- Do not add in any Fresh ingredients that can spoil easily as this will reduce the shelf life of product unless specified in recipe. Click here to find out more
- If applying on face, avoid citrus based or sandalwood essential oil as Malaysian weather will cause your skin to be easily sun burnt. Wear sun protection if add these Essential oils.
- If you have any questions; please don't hesitate to contact us here via FB messenger or via WhatsApp at 0126643817
- If you would like to join our Skincare & Soap Making Class Click here
- If you would like to have these readymade (PRIVATE LABEL/OEM) for you, email sales@soaplabmalaysia.com For Free Quotation.
Post a Comment
Please Whatsapp Us at 0126643817 for any enquiry