Today’s recipe is for a gentle and scent free soap. If you are looking for something mild yet relaxing, this is the soap for you. This soap we are making today is cold process soap. Its made from scratch from oils and therefore gives you a proper satisfaction of making your very own soap at home. Click here to read more about how do we formulate these soaps.
The soap is made with an oil mix which contains coconut, olive, castor and palm oil. Added to the oil mix, is distilled water, lye flakes and goat’s milk. The oil mix are rich in antioxidants and vitamins. These help improve the overall health of the skin, and protect the skin from damage. Goat’s milk repairs damaged skin and removes dead skin. This helps improve the overall health of your skin. This soap will definitely be an added boost in your quest for healthier skin.
Duration:
Preparation Time : 20 minutes
Total Time : 40 minutes
Ingredients: (makes 6 x 50g soap bars)
- 94.5g Coconut Oil
- 94.5g Olive Oil
- 31.5g Castor Oil
- 94.5g Palm Oil
- 46.5g SoapLab’s Sodium Hydroxide (NaOH) Pastilles
- 46.5g Distilled Water
- 31.5g UK Farm’s Fresh Goat’s Milk
- 10-20 sprays of Rubbing Alcohol
- 6 cavity silicon mold 50g
Equipments You Will Need:
- Heat Resistant Containers
- Spatula/ Stirrer (Can Also be kitchen Spoon)
- Weighing Scale (Digital)
- Heater (Induction cooker/ double boiler / microwave)
For more info on what other equipments you will need to start making handmade skincare; click here
Visual Guide
- Combine lye flakes with distilled water carefully. Wear gloves & long sleeves to avoid backsplash getting in contact with exposed skin.
- Slowly mix with a whisk until all the lye flakes have dissolved in the distilled water. Solution may become hot, do be cautious.
- To bring lye solution to room temperature, place container in a water bath.
- Measure out UK Farm’s Fresh Goat’s Milk carefully to avoid any spillage and then set aside.
- Separately, pour your Oil Mix into a heat resistant mixing container. Combine room temperature Lye Water with the oil mix.
- Next, use a whisk and mix until it reaches thin trace. Timing of this may vary as the faster you mix, the faster solution will saponify and reaches thin trace.
- Add in Fresh Goat’s Milk into the container and mix everything using a whisk until milk is evenly dispersed throughout the soap mixture.
- Prepare your silicone mold. Spray with Rubbing Alcohol to sanitise mold. Next, pour in soap mixture into each cavity. Pour carefully, soap might still be warm. Then, leave soap for 24 to 48 hours to harden.
- Once hardened, carefully pull mold away from soap. This will help preserve those desired sharp & crispy edges of the soap.
- Whenever you feel ready, gently push soap out from the mold.
- Soap will be needing 2 - 4 weeks to fully cure before it is used. Keep soap aside till then.
Video
Order Ingredients
Caution!
- Always test the product on your skin for allergic test first. Click here to find out how to do so
- If you are selling this product, advice your consumers to do allergic test first
- Make sure all your utensils and work surface is clean and sterilise as dirty area and utensils can reduce shelf life of scrub
- Do not add in any Fresh ingredients that can spoil easily as this will reduce the shelf life of product unless specified in recipe. Click here to find out more
- If applying on face, avoid citrus based or sandalwood essential oil as Malaysian weather will cause your skin to be easily sun burnt. Wear sun protection if add these Essential oils.
- If you have any questions; please don't hesitate to contact us here via FB messenger or via WhatsApp at 0126643817
- If you would like to join our Skincare & Soap Making Class Click here
- If you would like to have these readymade (PRIVATE LABEL/OEM) for you, email sales@soaplabmalaysia.com For Free Quotation.
Post a Comment
Please Whatsapp Us at 0126643817 for any enquiry